Analog / Značky / Audio Salon

IQ1 Cartridge

The Audio Note IQ cartridges are a refinement of the established Moving Magnet design principle, they use a highly rigid Pocan™ body shell and have detachable head shell to facilitate easy change or upgrade of stylus assembly, in fact the IQIII stylus fits the IQI and IQII bodies and make moving up the range simple.

IQ2 Cartridge

IQ3 Cartridge

IoI Cartridge

Moving coil, 0.05mV at 1ohm, 11 gr, titanium cantilever, silver coils, ALNICO magnets with magnetic iron, aluminium body

IoII Cartridge

Moving coil, 0.05mV at 1ohm, 18 gr, titanium cantilever, silver coils, ALNICO magnets with magnetic iron, gun metal body

Io Gold Cartridge

Moving coil, 0.05mV at 1ohm, 20 gr, titanium cantilever, silver coils, ALNICO magnets with permadure, gun metal body

Io Ltd Cartridge

Moving coil, 0.05mV at 1ohm, 22 gr, titanium cantilever, silver coils, silver wired electromagnets with permadure, solid silver pins, gun metal body, separate DC power supply for internal coils

AN-S1

All low versions should be used with Audio Note™ MC cartridges to get best bandwidth and dynamic conversion to retain harmonic envelope best possible. The new AN-S3 (meaning NOT the AN-S3L-AG which is being slowly phased out) and AN-S4 there are now 6 versions of each, 1 Ohm, 4 Ohm, 9 Ohm, 16 Ohm, 36 Ohm and 64 Ohm, the 1 Ohm is for all the Audio Note™ Io cartridges and the rest are for other low output moving coils, such as Dynavector, Denon, Clearaudio, Koetsu, Lyra, Goldbug, van den Hul, Allerts, Ortofon, Goldring and Micro Benz.

AN-S2

AN-S3

AN-S4

AN-S5

The AN-S5 is an Ultra high quality moving coil step up transformer copper wired on large super mumetal 250 core fully interleaved, two single impedance versions available, low and high. All low versions should be used with Audio Note™ MC cartridges to get best bandwidth and dynamic conversion to retain harmonic envelope best possible.

AN-S8

Ultra high quality moving coil step up transformer, Audio Note™ silver wired on large super mumetal 250 core fully interleaved, two single impedance versions available. All low versions should be used with Audio Note™ MC cartridges to get best bandwidth and dynamic conversion to retain harmonic envelope best possible. The new AN-S3 (meaning NOT the AN-S3L-AG which is being slowly phased out) and AN-S4 there are now 6 versions of each, 1 Ohm, 4 Ohm, 9 Ohm, 16 Ohm, 36 Ohm and 64 Ohm, the 1 Ohm is for all the Audio Note™ Io cartridges and the rest are for other low output moving coils, such as Dynavector, Denon, Clearaudio, Koetsu, Lyra, Goldbug, van den Hul, Allerts, Ortofon, Goldring and Micro Benz.

Arm One

Arm Two

Arm Three

All the Audio Note™ ARM versions are a rewired version of the REGA RB250. The RB250 has proven to sound better than the RB300 arm, which is why we have now changed to the RB250 exclusively. The ARM One/Two and Three are very suitable for the Audio Note™ IQ1, IQ2, IQ3 and IoI cartridges, the heavier Io cartridges are not suited for these two arms.

The ARM One, Two and Three are designed for the Audio Note™ AN-TT Zero, AN-TT One and AN-TT Two turntables, but will work very well on the AN-TT Three varieties as well as on most other turntables.

AN-1s/AN-V

All Audio Note™ AN-1s tone arms are available with 6 wires for use with the Audio Note™ Io Ltd. moving coil cartridge the two additional wires are for the DC feed to the electromagnets from the power supply. The AN-1s arms are designed specifically for the AN-TT Three turntables, but will work very well on most other manufacturer’s turntables as well, if Audio Note™ is provided with the necessary drawings, we can provide arm boards for most other brands.

AN-1s/AN-Vx

AN-1s/SOGON

Turntable TT-1

One motor turntable with three point suspended sub chassis, acrylic platter, available in beech, rosewood, cherry and black ash. Although the TT-1 would appear an entry level product, we have not compromised on component quality; You still have a solidly built chassis, acrylic platter and precision bearing that should last a lifetime.

Turntable TT-2

Two motor version of the TT-1 with increased torque and stability. Three point suspended sub chassis, acrylic platter, available in black ash only.

Turntable TT-3

The new TT Three Reference have 3 of these massive motors each pulling with about 2 BHP, giving a platter mass-inertia equivalent of well over half a ton (!) but without the usual and considerable energy storage drawbacks of a high mass platter. The motors draw so much power that each motor has its own power supply, so that makes 3 boxes.